Mobil DTE™ 20 Series

Product Description

Mobil DTE™ 20 Series oils are supreme performance anti-wear hydraulic oils designed to satisfy a wide range of hydraulic equipment requirements. They provide long oil/filter life and optimum equipment protection reducing both maintenance costs and product disposal costs. They were developed in conjunction with the major builders to meet the stringent requirements of severe hydraulic systems using high pressure, high output pumps as well as handling the critical requirements of other hydraulic system components such as close clearance servo-valves and the high accuracy numerically controlled (NC) machine tools. These products meet the most rigorous performance requirements of a wide range of hydraulic system and component manufacturers using various multi-metallurgy designs allowing a single product with outstanding performance characteristics.

The DTE 20 Series oils are formulated with high quality base oils and a super-stabilised additive system that neutralises the formation of corrosive materials. They are designed to work with systems operating under severe conditions where high levels of antiwear and film strength protection are needed, yet they are formulated to work where non-antiwear hydraulic oils are generally recommended.


Features and Benefits

The Mobil DTE 20 Series hydraulic oils provide outstanding oxidation resistance allowing extension of oil and filter change intervals. Their high level of anti-wear properties and excellent film strength characteristics result in exceptional equipment performance that not only results in fewer breakdowns but helps improve production capacity. Their detergency and keep clean properties offer service over a wide range of system cleanlinesses while their controlled demulsibility permits the oils to work well in systems contaminated with small amounts of water yet readily separate large amounts of water.


FeaturesAdvantages and Potential Benefits
Anti-wearHelps reduce wear
Protects systems using various metallurgy
Quality ReserveMaintains performance features even under severe service conditions and extended drain intervals
Helps improve system cleanliness
Oxidation StabilityProvides long oil and equipment life
Helps extend filter life
Corrosion ProtectionPrevents internal hydraulic system corrosion
Helps reduce the negative effects of moisture in systems
Provides corrosion protection of multi-metallurgy component designs
Meets a Wide Range of equipment requirementsOne product can replace several products, minimizing inventory requirements
Helps reduce potential for product misapplication
Air Separation CharacteristicsReduces foaming potential and it's negative effects
Water SeparationProtects systems where small quantities of moisture are present
Readily separates larger quantities of water
Keep Clean PropertiesHelps reduce system deposits and sludging helping to reduce maintenance costs
Protects critical components such as servo-valves helping to extend equipment life
Helps improve total system performance



  • Hydraulic systems critical to deposit build-up such as sophisticated Numerically Controlled (NC) machines, particularly where close clearance servo-valves are used
  • Where small amounts of water are unavoidable
  • Applications where sludges and deposits form with conventional products
  • In systems containing gears and bearings
  • Systems requiring a high degree of load-carrying capability and anti-wear protection
  • Applications where thin oil-film corrosion protection is an asset such as systems where small amounts of water are unavoidable
  • Machines employing a wide range of components using various metallurgy


Specifications and Approvals


Mobil DTE 20 Series meets or exceeds the requirements of:21222425262728
DIN 51524-2 2006-09 XXX  


Mobil DTE 20 Series has the following builder approvals21222425262728
Vickers I-286-S  XXX  
Vickers M-2950-S  XXX  
Denison HF-0  XXX  
Denison HF-1  XXX  
Denison HF-2  XXX  
Husky HS 207   X   


Typical Properties


Mobil DTE 20 Series21222425262728
ISO Grade1022324668100150
Viscosity, ASTM D 445       
cSt @ 40º C10.021.031.544.271.295.3142.8
cSt @ 100º C2.744.55.296.658.5310.914.28
Viscosity Index, ASTM D 227098989898989898
Specific Gravity @ 15.6º C/15.6º C, ASTM D 12980.8450.8600.8710.8760.8810.8870.895
Copper Strip Corrosion, ASTM D 130, 3 hrs @ 100º C1B1B1B1B1B1B1B
Rust Characteristics Proc B, ASTM D 665PassPassPassPassPassPassPass
Pour Point, ºC, ASTM D 97-30-30-27-27-21-21-15
Flash Point, ºC, ASTM D 92174200220232236248276
FZG 4-Square Load Support, DIN 51354, Fail Stage--1212121212
Foam Sequence I, II, III, ASTM D 892 , ml20/020/020/020/020/020/020/0
Допълнителна информация
Мерна единица

Напиши отзив

Please login or register to review

Mobil DTE™ 20 Series

  • Производител: Mobil
  • Код: MBHYDRDTE20
  • Продуктът е наличен
0 продукт/и продадени
  • 0.00 лв.
  • Цена с вкл. ДДС